Features

Cabot Problem-Solver Wood Cleaner #8002 is specially formulated to remove dirt, mildew stains and other foreign matter from all painted, stained, unfinished or weathered wood surfaces. Unlike other mildew stain cleaners, this easy-to-use Cabot product does not require the addition of bleach to be effective.

Coverage

On smooth surfaces, approximately 200-400 square feet per gallon. These rates will vary depending upon the porosity of the surface.

Where to Use

Use for routine cleaning as well as for properly preparing all surfaces prior to staining or painting. Cabot Problem-Solver Wood Cleaner is ideal for use on new or previously stained or painted wood surfaces including decks, siding, fences, railings and steps. It also provides excellent results when used for cleaning untreated weathered wood as well as aluminum, vinyl and plastic surfaces.

Preparing Your Surfaces

Because it is difficult to determine the condition of the surface to be cleaned, test the recommended dilution on a small hidden area to determine its effectiveness. Cabot Problem-Solver Wood Cleaner is not a paint or stain remover. It will, however, remove paint or stain in an unsound condition. This product is specially formulated to remove dirt, mildew stains and other foreign matter and revive wood. Use Cabot Problem-Solver Strippers (8004 and 8005) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove tannin bleed (discoloration caused by extractive bleeding), nail and metal rust stains, and renew the wood's appearance.

Application

Apply cleaning solution liberally to problem surfaces using a brush or pump-type sprayer. Allow to set 15 to 20 minutes. Stubborn areas may require scrubbing with a stiff bristle brush. (If surface begins to dry quickly, lightly mist with water.) Rinse off using a garden hose with nozzle at maximum pressure or use a high pressure power washer. Repeat procedure if necessary.